View SMT05E-05S1V5-TJ_140463.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Embedded Power for Business-Critical Continuity
SMT05E Series
3.0-5.5 Vin single output
Rev.06.26.07 smt05e 1 of 4
Total Power: 8.25W Input Voltage: 3.0 - 5.5 Vdc # of Outputs: Single
Special Features
* 5 A Current rating * Input voltage range: 3.0 Vdc - 5.5 Vdc * Output voltage range: 0.75 Vdc - 3.63 Vdc * Ultra high efficiency: 94% @ 5 Vin and 3.3 Vout * Extremely low internal power dissipation * Minimal thermal design concerns * Designed in reliability: MTBF of >9 million hours per Telcordia SR-332 * Ideal solution where board space is at a premium or tighter card pitch is required * Industry standard surface-mount footprint * Available RoHS compliant * 2 year warranty
The SMT05E series are non-isolated dc-dc converters packaged in a surface mount footprint giving designers a cost effective solution for conversion from a 3.3 Vdc to 5 Vdc source. The SMT05E has a wide input range (3.0 Vdc to 5.5 Vdc) and offers a wide 0.75 Vdc to 3.63 Vdc output voltage range with a 5 A load, which allows for maximum design flexibility and a pathway for future upgrades. The SMT05E is designed for applications that include distributed power, workstations, optical network and wireless applications. Implemented using state of the art surface-mount technology and automated manufacturing techniques, the SMT05E offers compact size and efficiencies of up to 94%.
Safety
UL/cUL CAN/CSA 22.2 No. E174104 UL 60950 File No. E174104 TUV Product Service (EN60950) Certificate No. B 03 10 38572 CB report and certificate to DE3-51686M1
Embedded Power for Business-Critical Continuity
Specifications
All specifications are typical at nominal input, full load at 25C unless otherwise stated.
Rev.06.26.07 smt05e 2 of 4
OUTPUT SPECIFICATIONS Voltage adjustability Setpoint accuracy Line regulation Load regulation Minimum load Overshoot/undershoot Ripple and noise 5 Hz to 20MHz Temperature co-efficient Transient response 0.75-3.63 Vdc 0.4% 1.0% 1.0% 0A None 75 mV pk-pk 25 mV rms 0.01%/C 60 mV max. deviation 50 s recovery to within 1%
EMC CHARACTERISTICS Electrostatic discharge Conducted immunity Radiated immunity GENERAL SPECIFICATIONS Efficiency Insulation voltage Switching frequency Approvals and standards Material flammability Dimensions Weight 3.0-5.5 Vdc No load (max.) 150 mA 3.9 A max. @ Io max. and Vout = 3.3 V 40 mA rms (See Note 1) 20 ms PROTECTION Short-circuit Thermal Continuous Automatic recovery Coplanarity MTBF Telcordia SR-332 (LxWxH) Fixed See Table Non-isolated 300 kHz typ. EN60950 UL/cUL60950 UL94V-0 20.32 x 11.43 x 6.70 mm 0.800 x 0.450 x 0.264 inches 2.8 g (0.10 oz) 100 m 9,009,000 hours EN61000-4-2, IEC801-2 EN61000-4-6 EN61000-4-3
INPUT SPECIFICATIONS Input voltage range Input current Input current (max.) Input reflected ripple Remote ON/OFF Start-up time
ENVIRONMENTAL SPECIFICATIONS Thermal performance (See Note 2) Operating ambient, temperature Non-operating -40 C to +85 C -40 C to +125 C
Embedded Power for Business-Critical Continuity
Specifications
All specifications are typical at nominal input, full load at 25C unless otherwise stated.
Rev.06.26.07 smt05e 3 of 4
OUTPUT POWER (MAX.) 8.25 W 18.15 W
INPUT VOLTAGE 3.0-5.5 Vdc 3.0-5.5 Vdc
OUTPUT VOLTAGE 1.5 Vdc 0.75-3.63 Vdc
OUTPUT CURRENT (MIN.) 0A 0A
OUTPUT CURRENT (MAX.) 5A 5A
EFFICIENCY (TYP.) 87.5% 94%
REGULATION LINE 1.0% 1.0% LOAD 1.0% 1.0%
MODEL NUMBER (3,4) SMT05E-05S1V5J SMT05E-05W3V3J
Part Number System with Options
S M T 0 5 E- 0 5 W 3 V 3 -T J
Packaging Options (3) No `-T' Suffix = Pb-free RoHS 6/6 compliant parts in trays e.g SMT30E-12W3V3J -TJ = Pb-free RoHS 6/6 compliant part in Tape and Reel e.g SMT30E-12W3V3-TJ
Product Family SMT = Surface Mount Rated Output Current 05 = 5 Amps Performance E = Enhanced Performace Input Voltage 05 = 3.0 Vdc to 5.5 Vdc
Output Voltage 0.75 Vdc to 3.63 Vdc Type of Output S = Single W = Wide
Output Voltage Adjustment of the SMT05E-05W3V3J Series
The ultra-wide output voltage trim range offers major advantages to users who select the SMT05E-05W3V3J. It is no longer necessary to purchase a variety of modules in order to cover different output voltages. The output voltage can be trimmed in a range of 0.75 Vdc to 3.63 Vdc. When the SMT05E-05W3V3J converter leaves the factory the output has been adjusted to the default voltage of 0.75 V.
* When Vin 4.5 V, then Vout can be adjusted from 0.75 Vdc to 3.63 Vdc * When Vin < 4.5 V, then Vout can be adjusted from 0.75 Vdc to 2.75 Vdc
Notes
1 The SMT05E features a `Negative Logic' Remote ON/OFF operation. If not using the Remote ON/OFF pin, leave the pin open (the converter will be on). The Remote ON/OFF pin is referenced to ground. The following conditions apply for the SMT05E: Configuration Remote pin open circuit Remote pin pulled low Remote pin pulled high [Von/off > 2.5 V] Converter Operation Unit is ON Unit is ON Unit is OFF
2 3 4
An `Positive Logic' Remote ON/OFF version is also possible with this converter. To order please use part number SMT05E-05W3V3-RJ or SMT05E-05W3V3-RTJ. Full derating curves available in both the Longform Datasheet and Application Note. TSE RoHS 5/6 (non Pb-free) compliant versions may be available on special request, please contact your local sales representative for details. NOTICE: Some models do not support all options. Please contact your local Artesyn representative or use the on-line model number search tool at http://www.artesyn.com/powergroup/products.htm to find a suitable alternative.
Embedded Power for Business-Critical Continuity
Rev.06.26.07 smt05e 4 of 4
Americas
0.160 (4.06) 0.190 (4.83) 0.450 (11.43) 0.160 (4.06) 0.180 (4.57)
5810 Van Allen Way Carlsbad, CA 92008 USA Telephone: +1 760 930 4600 Facsimile: +1 760 930 0698
Europe (UK)
0.350 (8.90)
4
3
2
0.340 (8.64)
TOP VIEW
5
0.800 (20.32) BOTTOM VIEW 0.050 (1.26)
1
0.041 (1.04) 0.060 (1.52)
Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX United Kingdom Telephone: +44 (0) 1384 842 211 Facsimile: +44 (0) 1384 843 355
Asia (HK)
16th - 17th Floors, Lu Plaza 2 Wing Yip Street, Kwun Tong Kowloon, Hong Kong Telephone: +852 2176 3333 Facsimile: +852 2176 3888
0.264 [6.70]
0.062 (1.57)
SIDE VIEW CONNECTOR (5PL) LENGTH 0.090 (2.29) WIDTH 0.062 (1.57)
SEATING PLANE All dimensions in inches (mm) All tolerance 0.010in (0.25mm) unless otherwise stated
For global contact, visit:
www.powerconversion.com technicalsupport@powerconversion.com
While every precaution has been taken to ensure accuracy and completeness in this literature, Emerson Network Power assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions.
PIN CONNECTIONS PIN NUMBER 1 2 3 4 5 FUNCTION Remote ON/OFF Vout Trim Ground +Vin
Emerson Network Power. The global leader in enabling business-critical continuity. AC Power Connectivity DC Power Embedded Power Inbound Power Integrated Cabinet Solutions Outside Plant Precision Cooling Site Monitoring and Services EmersonNetworkPower. com
Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. (c)2007 Emerson Electric Co.

▲Up To Search▲

Price & Availability of SMT05E-05S1V5-TJ

	To Download SMT05E-05S1V5-TJ Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .